Ubiquiti UniFi 802.11AC In-Wall Access Point with Ethernet port

Description

Ubiquiti UniFi 802.11AC In-Wall Access Point with Ethernet port

UAP-AC-IW Key Features
•802.11AC Wi-Fi
•Two Gigabit Ethernet ports
•300 Mbps at 2.4GHz
•867 Mbps at 5GHz
•up to 100m Range

The UniFi AC In-Wall AP provides simultaneous, dual-band, 2×2 MIMO technology and is available in single packs (PoE adapters not included).

UAP-AC-IW Specifications

• Dimensions 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01″)
• Weight 200 g (6.43 oz)
• Networking Interface (3) 10/100/1000 Ethernet Ports
• Buttons Reset
• Power Method 802.3at PoE+ Supported
• Power Supply UniFi PoE Switch (Not Included)
• Power Save Supported
• PoE Out 48V Pass-Through (Pins 1, 2+; 3, 6-)
• Maximum Power Consumption with PoE Passthrough 7W 19W*
• Maximum TX Power 2.4 GHz 20 dBm 5 GHz 20 dBm
• Antennas (1) Dual-Band Antenna, Single-Polarity, 2.4 GHz 1 dBi, 5 GHz 2 dBi
• Wi-Fi Standards 802.11 a/b/g/n/r/k/v/ac
• Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• BSSID Up to 8 per Radio
• Mounting 1-Gang Electrical Wall Box (Not Included)
• Operating Temperature -10 to 50° C (14 to 122° F)
• Operating Humidity 5 to 95% Noncondensing
• Certifications CE, FCC, IC
  * Requires 802.3at PoE+ switchAdvanced Traffic Management
• VLAN 802.1Q
• Advanced QoS Per-User Rate Limiting
• Guest Traffic Isolation Supported
• WMM Voice, Video, Best Effort, and Background
• Concurrent Clients 250+Supported Data Rates (Mbps)
• 802.11ac 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
• 802.11n 6.5 Mbps to 300 Mbps (MCS0 – MCS15, HT 20/40)
• 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11b 1, 2, 5.5, 11 Mbps