Ubiquiti Nanostation Loco M5 5GHz 802.11a/n MIMO antenna, WiFi Wireless Outdoor CPE, 10+ km

Description

NanoStation Loco M5

Do you have to spend thousands of dollars just to have a very efficient and reliable wireless network? The answer is no. NanoStation Loco M5 is great proof of that. A cost-effective solution, it performs just as well as its more expensive counterparts. Plus it has a very elegant form factor that can stand up against rain, snow, and heat. It’s truly a device that doesn’t immediately wear out, a perfect option for long-term wireless network investment.

High-performing

The NanoStation Loco M5 is known for its much smaller size than the other NanoStation, which makes it ideal for residential or small building use. It has a good throughput of around 150 mbps, sufficient to cover multitudes of devices and users simultaneously. It has a great reach at 13dBi through its integrated antenna. It operates at a frequency of GHz, which is ideal if you want to maximize throughput. This signal is seldom interrupted by noise or clutter as most devices and appliances work on 2.4GHz frequency.

AirMax

The unit also makes use of the AirMax technology and its TDMA protocol. It lets you compartmentalize time schedules so you’ll be able to enjoy a smoother transmission and receipt of wireless connection. Moreover, you are also able to reduce latency, even if there are already a lot of devices that are connected to the network. It works very well along with the quality of service so you can prioritize the allocation of the available bandwidth.

NanoStation Loco M5 can be controlled via the software AirOS and AirController. It’s a web-based management interface.

PoE

The NanoStation Loco M5 is also compatible with a PoE (Power over Ethernet setup) so you can deal with fewer wires. Moreover, you can now reset its power directly from the main source than on the equipment itself, saving you the hassle.

Compact CPE Design

The NanoStation®M features the CPE design that expanded the global Wireless ISP industry.

Specifications

Dimensions 164 x 72 x 199 mm (6.46 x 2.83 x 7.83″)
Weight 900 g (1.98 lbs)
Power Supply (PoE) 24V, 0.5A
Max. Power Consumption 6.5W
Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
Operating Frequency 902-928 MHz
Gain 8 dBi
Networking Interface (1) 10/100 Ethernet Port
Processor Specs Atheros MIPS 24Kc, 400 MHz
Memory 64 MB SDRAM, 8 MB Flash
Frequency 900 MHz
Cross-pol Isolation 28 dB Minimum
Max. VSWR 1.3:1
Beamwidth 60° (H-pol) / 60° (V-pol) / 60° (Elevation)
Polarization Dual Linear
Enclosure Outdoor UV Stabilized Plastic
Mounting Pole-Mount (Kit Included)
RF Connector External RP-SMA
Operating Temperature -30 to 75° C (-22 to 167° F)
Operating Humidity 5 to 95% Noncondensing
Wireless Approvals FCC Part 15.247, IC RS210
RoHS Compliance Yes
Shock & Vibration ETSI300-019-1.4